VIP ROOM POST NATAL CARE

CONCEPT, 6x4m2 sized room. With the bathroom in front. This room has a door with a width of 1:35 kuran meters as the circulation of a hospital bed. The main window is large, so That the needs terpeuhi sunlight in the room. medical equipment as the completeness of hospital hidden in the back of the bed Creates impression of a more neat, and orderly. COLOR, majority white interior use. It is intended to give a clean impression. Then coupled with a brown color adds hangta wood indoors. MATERIAL, many uses of wood materials. Doors, shadding, floor and furniture in the room. On the wall using the color on the floor using a pattern putih.Sementara parquette.Sedangkan wc door, pvc door use to be resistant to water. FACILITY, on this mother inpatient room has one bathroom and some other facilities: television, couch, air conditioning cupboard and so on

Architecture and Environment

ELECTRICAL BOX

In Yogyakarta there is one building known as the "electrical box". The building is located in the center of the entrance to the city center, which is located behind the side Malioboro.Bangunan Garuda hotel. When people will go to Malioboro must pass through the building known as the "power box" is.

Electrical box is a brick-walled building. The breadth and width of approximately 3x4 m2. Electrical box is used to serve to manage the electricity in the area of ​​Malioboro and surrounding areas. In the development berikuitnya, at least right now, this electrical box was not functioning as a "place to manage electricity", but has been changed as a sign of managing traffic.

Why sign traffic manager?

Because the electrical box was located in the middle of the main road to Malioboro, so the traffic that passes through the electrical box to go some way around it, eg from road heading Mataram Kotabaru region must pass through the box lisrtrik memutarainya way. Vice versa, bikers and cars from the area or region Kotabaru Mangkubumi Road after turning off the road kleringan, to get to the Malioboro area must pass through electrical boxes.

The existence of electrical boxes have been changed for the regulatory function of not only traffic, but also as a sign of a past relationship Atar interaction around that road. Therefore, in order to be culturally productive power box that needs to be managed better, even without the run has become a cultural sign. Because if one of managing, as there is the idea of ​​the necessity of dismantling the building's electrical box, is a notion that does not depart from the basis of culture, but rather for the economic interests: Dismantling means the project. This way of thinking projects are indeed damaging cultural image. Since projects usually have a tendency to scatter and divide the money.

Will feel more kultual when electrical box used as a place for information to the public. But not to place advertisements. For example, the electrical box is marked on when the building was constructed. In addition, the electrical box, on the other side could be written on each anniversary date of how the birth city of Yogyakarta, carried out and so on. In short, information that gives information to the public. This means that the electrical box was treated as a public space used for public purposes in the context distrubusi information.

There are a lot of information that can disampaaikan related to city and regional governments DIY, so that it can provide information for others who happened to be a moment in Yogyakarta and passed that way. This means, people who will enter from the east area of ​​Malioboro, inevitably, will get the information through electrical boxes.
Later on, the city's electricity will probably be renamed the information box

Dear My house, how I picked you?

The house is a basic need we all.

Without a home, we as if with no clothes on so it does not deserve to be in the community. In addition, the house also became a trade mark of social status of one's own will.

Formerly not difficult to have a house because the land is available very, very broad and fairly for all people to build their homes, either independently or cooperate, because the citizens are ready to help us at all times is required. However, others had different now. Nowadays having a dwelling house itself is often just a mere dream for so many obstacles that confront, ranging from land to the fund.

For those who are able though, to the desire to have a good house not an easy matter. In the midst of very rapid flow of information nowadays, people are often discouraged, even just to determine what kind of house they desire. Suggestions and advice of friends and close relatives who already have residence was just added to the confusion because a wide variety of suggestions given. Not to mention the number of bids currently available homes ready for habitation of the developers, from the cheapest to the most luxurious adds to the confusion of its own.

However, the architecture and the architect or interior designer and interior designer, particularly associated with the dwelling house, lately more and more to public attention, especially among those who have the breadth and the relative excess capacity to think and realize their dreams of a dream home respectively.

If we go back to the condition of architecture and interior design today, its development as part of general public knowledge is more than time ago. Good momentum this presumably can be used to broaden and deepen pembahsan architecture in society. And ultimately easier for us in determining the dream house that we want

Mangkubumi City Hotel

Architectural Design Studio V

Project Design : City Hotel
Site : Mangkubumi Street, Yogyakarta


Buikding Facade




Interior

From Model To Manufacture

At this time to make an eccentric model is straightforward. Formerly very expensive and time-consuming. This is because the 3D animation software that support it. Some of the technologies used to process "from model to manufactured" as below also facilitate the work of a Model Become A product.

- Laser cutting (steel, plastic, aluminum)
- Plasma-cutting (steel)
- Router (wooden panel)
- Waterjet (almost all of the material)

All these are tools that simplify the implementation of works to be made ​​from a model ..

Sample Application Architecture At Work.

- Angel Wings Sculpture
source: http://www.testmeat.co.uk/photos/images/christmasangelwings.jpg

Created as an ornamental kiosks with the formation of angel wings. Formation is made curved wings without touching the kiosk building itself. Bentukannya initially bend of the wing so it looks like dancing to the beat.
The pattern is made double wing, which is then connected (in welding). Which then inter-connected to form a pla different wings of birds.



- Electric Wharf Footbridge, Coventry

Source:

http://www.deandyball.co.uk/user/files/projects_gallery/civil_engineering/structures/electric_wharf/electric_wharf_footbridge___by_day_r_358x237.jpg

Is a small bridge that consists of Arc sculpture as high as 18 meters, with spans of 30 meters. As well as the retrofitting of the bridge over the canal itself.
Arch-making technique is akin to making the foot of Angel Wings. Foot structure is made up of steel piles and steel pipe that connects the triangular-shaped steel bulk-head (the structure of filler).
In making this curved surface shape through digital modeling architecture, this formation dideretkan 6mm to form arches that form the arch angle.



- Bullring Spiral Café, Birmingham- Marks Barfield Architects

Source: http://pro.corbis.com/images/42-18718070.jpg

Formation of a spiral shape departs from the Fibonacci golden section. Then reproduced the position amounted to 8 pieces placed in accordance with the existing pattern.
Into eight formations is an associated rapid arranged so as to form a different surface.
Formation sequence is arranged in a circular pattern that has been sisiapkan in the form of folds. For the structure itself, consisting of a framework that supports the building functions as well as providing a pattern. This profile terbetuk existing order of formation, resulting from the pattern of the frame was tilted ditelah stand that is not symmetrical.
This order form is made from existing geometry, then made with cutting tools (laser-cut steel ribs). Made with CNC cutter program (Computer Numerically Controlled Cutter). The cutting technique is not entirely just for the steel, but also plywood (plywood) and copper.

Digital Architecture

New Blog